After some of the usual winter ills I have been doing some modelling again. I haven’t been doing any painting so there’s a buildup of incomplete kits. Lets do a quick review.
Me 262 Schnellbomber. This one has had some Tamiya rattle can RLM76 applied and now needs the camo airbrushed on. I have an Eduard vinyl paint mask ready for this
Next up is the Modellcollect E100 withV1 launcher. This is up to needing a first coat of Tamiya rattle can yellow. The tracks were a bit of a wrestle with some major issues in getting clearance around the front drive sprocket which needed some teeth removed to get the tracks to fit. The tracks and wheels have been pre painted ready for masking off when I begin the major painting. The tracks are Dragon style cream rubber band style. At least they glue ok unlike old style black rubber ones and they are a bit more solid. Individual track links are great until you have to glue a hundred odd of the bastards. Link and length if not too long are often the best bet in 1.72.
Next are a few Russian KV2S. You are going to see a few of these in the next few months. These are the Trumpeter kits. I have a plan involving using 3 of these but unfortunately ordered the wrong type of turret, one type is sloped at the front and the other is vertical. I ordered the sloped sort in error and I am expecting the right ones in about a month from HobbyEasy. In the meantime I am doing one as an ordinary KV2 , another’s as a 120 mm Stug with a spare plastic gun from a Modellcollect that also has a brass one and the third with a Pz IV turret I have spare.
For the next batch I have one planned as a rocket weapons carrier and I have yet to come up with an idea for the last one.
You will note the Stug gun in the middle has been broken by accident which was done when I was adding the etched brass gun brake. The major fault with the turret is the steps which are solid and will be replaced by wire.
Last up is 2 kits that I ordered with the KV2s. One is the E100 stug And the other is a very detailed E50 kit, hard to believe it is only 1.72 given the detail including brass . More on these later.




